Universal Exhaust Gas Oxygen Sensor Card
$5,870.00
Concurrent Real Time’s UEGO is a 4-channel Universal Exhaust Gas Oxygen Sensor simulator card with a PCI Express interface that is ideal for high-performance hardware-in-the-loop (HIL) simulation and test applications. It will allow a software simulation to control the operating feedback parameters as if an O2 sensor was connected to an engine control ECU. It can simulate both wide band and narrow band O2 sensors. There is galvanic isolation for each channel pair. In addition, each channel can monitor the O2 heater drive pulse code modulated (PCM) signal for proper feedback of the sensor temperature. O2 sensor signals have open, ground and positive voltage fault insertion capability.
Each request is reviewed by our engineering and sales teams to ensure configuration accuracy, system compatibility, and delivery requirements.
What is the Universal Exhaust Gas Oxygen Sensor Card?
Concurrent Real Time’s UEGO is a 4-channel Universal Exhaust Gas Oxygen Sensor simulator card with a PCI Express interface that is ideal for high-performance hardware-in-the-loop (HIL) simulation and test applications. It will allow a software simulation to control the operating feedback parameters as if an O2 sensor was connected to an engine control ECU. It can simulate both wide band and narrow band O2 sensors. There is galvanic isolation for each channel pair. In addition, each channel can monitor the O2 heater drive pulse code modulated (PCM) signal for proper feedback of the sensor temperature. O2 sensor signals have open, ground and positive voltage fault insertion capability.
Specifications
Hardware Features
| O₂ Sensor Simulation | 4-channel |
| Sensors Supported | Wideband or narrowband |
| Heater PCM Monitoring | Yes |
| Fault Insertion | Open, Ground, and V+ |
| Galvanic Isolation per Channel Pair | Yes |
| Input Protection | ±50 VDC |
| On-board Test ASIC | Yes |
| Connector Type | Industry-standard SCSI 68-pin connector for outputs |
| Bus Interface | PCIe x1 Gen 1 |
Packaging
| Form Factor | Full-height PCI Express |
| Dimensions | 9.5″ (L) × 3.8″ (H) |
Power Requirements
| Power Consumption | Less than 25 watts |
| Voltage | 3.3 VDC @ 1.2 A typical |
| Auxiliary Power | +12 VDC @ 1.0 A typical |
Environmental
| Operating Temperature | 0 °C to +70 °C |
| Storage Temperature | −40 °C to +85 °C |
| Relative Humidity | 5 % to 95 %, non-condensing |
| Cooling | Air-cooled; no external fan required |
Ordering Information
| Model Number | Description |
|---|---|
| SIM-O2-PCIe | 4-Channel O₂ Sensor Simulator PCIe Card |
| SIM-O2-CABLE-68 | 68-pin shielded cable, 1 meter |
| SIM-O2-BRK-68 | 68-pin breakout board with terminal blocks |
Related products
-
Programmable FPGA Card
Price range: $12,678.00 through $14,758.00Select options This product has multiple variants. The options may be chosen on the product pageCompare -
64-Channel Analog Input Card
$5,870.00Select options This product has multiple variants. The options may be chosen on the product pageCompare -
Engine Sensor Simulation Card
$13,718.00Select options This product has multiple variants. The options may be chosen on the product pageCompare -
Arria 10 FPGA Card
Price range: $10,598.00 through $15,798.00Select options This product has multiple variants. The options may be chosen on the product pageCompare