Pulse Width Modulation Input/Output PCIe card

Contact an Expert

What is the Pulse Width Modulation Input/Output PCIe card?

The CP-PWM-3232 autonomously generates and captures TTL pulse width modulated (PWM) signals with high accuracy. With a timing resolution of 15 ns and the ability to program sine frequencies, PWM frequencies, dead-band and duty cycle in real time, the CP-PWM-3232 card is ideal for use in hardware-in-the-Loop (HIL) systems. The card provides 32 channels that are individually programmable for 5V TTL input or output. The card features 301K logical FPGA elements. Multiple cards are supported per system. Requires a PCIe x4 slot or higher. Supported by SIMulation Workbench. (Cable Options: CX-CBL-HSI-F-xx; Breakout module CX-CBL-AIO-BRKF.)

Specifications:

  • FPGA-based PWM board
  • TTL inputs and outputs
  • 3 modes of output operation (up to 32 outputs)
    • 10-channel, 3 phase complementary PWM output
    • 5-channel, 6 phase complementary PWM output
  • 32-bit input resolution (up to 32 inputs)
  • Programmable sine wave frequency, PWM frequency, duty cycle and dead band
  • Measurement frequency range of 1 Hz to 40 MHz
  • Measurement duty cycle of 0-100%
  • 20 MHz PWM base frequency i.e. timing resolution of 15 ns
  • External Connectors: 68-pin SCSI-5 (VHDCI) to SCSI-3 Male I/O Interface
  • PCIe x4 Gen 1
  • Power Consumption: ~10 watts

(Cable Options: CX-CBL-HSI-F-xx; Breakout module CX-CBL-AIO-BRKF.)

I/O Interface Cables:

CX-CBL-HSI-F-02 — 68-pin SCSI-5 (VHDCI) to SCSI-3 Male I/O Interface Cable, 2 meter

2-meter SCSI-5 (VHDCI) to SCSI-3 Cable – VHDCI .8mm 68-pin Male to HPDB68 (HD68) 68-pin Male. Note: Four cables are required to utilize all board functionality on CP-MFIO, CP-ENG-SIM and CP-FPGA-x; two cables are recommended to utilize all functionality on CP-ADS6418 and CP-COS-64.

CX-CBL-HSI-F-03 — 68-pin SCSI-5 (VHDCI) to SCSI-3 Male I/O Interface Cable, 3 meter

3-meter SCSI-5 (VHDCI) to SCSI-3 Cable – VHDCI .8mm 68-pin Male to HPDB68 (HD68) 68-pin Male. Note: Four cables are required to utilize all board functionality on CP-MFIO, CP-ENG-SIM and CP-FPGA-x; two cables are recommended to utilize all functionality on CP-ADS6418 and CP-COS-64.

CX-CBL-HSI-F-05 — 68-pin SCSI-5 (VHDCI) to SCSI-3 Male I/O Interface Cable, 5 meter

5-meter SCSI-5 (VHDCI) to SCSI-3 Cable – VHDCI .8mm 68-pin Male to HPDB68 (HD68) 68-pin Male. Note: Four cables are required to utilize all board functionality on CP-MFIO, CP-ENG-SIM and CP-FPGA-x; two cables are recommended to utilize all functionality on CP-ADS6418 and CP-COS-64.

CX-CBL-HSI-F-15 — 68-pin SCSI-5 (VHDCI) to SCSI-3 Male I/O Interface Cable, 15 meter

15-meter SCSI-5 (VHDCI) to SCSI-3 Cable – VHDCI .8mm 68-pin Male to HPDB68 (HD68) 68-pin Male. Note: Four cables are required to utilize all board functionality on CP-MFIO, CP-ENG-SIM and CP-FPGA-x; two cables are recommended to utilize all functionality on CP-ADS6418 and CP-COS-64.

I/O Terminal Breakout Modules

CX-CBL-AIO-BRKF — I/O Terminal Breakout Module, 68-Pin Female SCSI-3, DIN Mount

I/O terminal breakout module, 68-pin female, SCSI-3, DIN mount. Provides a screw terminal for 68 lines.

Prerequisites: Use with CX-CBL-HSI-68-xx or CX-CBL-HSI-F-xx cable.

More Real-Time I/O Cards

  • CP-FPGA-6: SignalHawk I/O Programmable FPGA Card

    The SignalHawk I/O CP-FPGA-6 is a high-performance, low-latency FPGA card designed for advanced real-time applications including simulation, signal processing, and industrial control. With flexible I/O capabilities, robust DMA performance, and precise timing…

    Read more

  • Arria 10 FPGA Card

    The Arria 10 FPGA PCIe card features a powerful field programmable gate array chip that supports both analog and digital I/O. Each card’s I/O functionality is fully customizable by the user by…

    Read more

  • Programmable FPGA Card

    Concurrent Real-Time’s family of programmable FPGA PCIe cards feature a powerful field programmable gate array that supports both digital and analog I/O. The cards can control up to 96 digital I/O signals…

    Read more