Real-Time Simulation for Aerospace and Defense: An Engineering Guide

Real-time simulation allows aerospace and defense teams to execute system models in synchronization with actual elapsed time. Unlike offline simulation, a real-time environment must complete model calculations, process inputs, and generate outputs within defined timing deadlines.

This timing requirement allows physical hardware, embedded software, sensors, actuators, communication interfaces, and human operators to interact with a simulated system as though they were operating in the real environment.

Real-time simulation is used throughout aerospace and defense development for applications such as:

  • Flight-control and avionics validation
  • Missile guidance, navigation, and control testing
  • Spacecraft and launch-system simulation
  • Radar, seeker, and sensor emulation
  • Hardware-in-the-Loop testing
  • Operator and crew training
  • High-speed data acquisition
  • Mission-system integration

The quality of a real-time simulation depends on more than model accuracy or processor speed. The complete test environment must preserve the timing relationships among models, interfaces, hardware, and operators.

A simulation is real time when simulated time advances at the same rate as physical time.

Consider a flight-dynamics model configured to update once every millisecond. During each one-millisecond period, the simulation may need to:

  1. Acquire sensor or hardware inputs.
  2. Update values shared among simulation components.
  3. Execute one or more mathematical models.
  4. Calculate the system’s next state.
  5. Generate output signals.
  6. Send those outputs to connected hardware.
  7. Record selected test data.
  8. Prepare for the next execution period.

All time-critical work assigned to that period must finish before the next period begins.

An offline simulation can pause or take longer to calculate a complex event. A real-time simulation cannot pause the connected flight computer, controller, sensor interface, or human operator while it catches up. The physical components continue operating according to real-world time.

This is what makes real-time simulation suitable for closed-loop interaction with actual equipment.

Real-time performance is frequently confused with high computational speed.

A processor may complete most calculations very quickly while occasionally taking longer because of operating-system activity, interrupt handling, memory contention, network traffic, or another competing workload. Its average execution time may appear excellent even though it occasionally misses a critical deadline.

For example, suppose a model normally executes in 400 microseconds but occasionally requires 1.2 milliseconds. If the model must update every millisecond, those longer executions create deadline overruns.

The question is therefore not only:

How fast does the model usually run?

It is also:

Can every required operation finish within its assigned timing boundary under representative operating conditions?

That distinction is especially important in aerospace and defense systems where the timing of an input or output can affect how connected hardware responds.

Throughput measures how much work a system completes over time. Determinism concerns whether critical work completes within predictable timing limits.

A general-purpose computing system is often optimized for overall throughput and responsiveness across many applications. It may defer one task temporarily if doing so improves total system efficiency.

A deterministic real-time system prioritizes the timing requirements of selected workloads. Critical simulation processes can be assigned to specific processor cores, protected from unrelated activity, and scheduled according to defined execution periods.

High throughput remains valuable for large models, data processing, visualization, and storage. However, throughput alone does not establish whether a system can maintain a closed real-time loop.

For a more detailed discussion, see Why Deterministic Timing Matters in Real-Time Simulation.

A closed-loop simulation continuously exchanges data with the equipment under test.

The basic sequence is:

  1. The simulation calculates the current state of the modeled system.
  2. The simulation converts model values into signals or messages expected by the equipment under test.
  3. The equipment processes those inputs and generates a response.
  4. The simulation receives the response through its physical or communication interfaces.
  5. The response is applied to the model.
  6. The model calculates the next system state.

This process repeats continuously throughout the test.

For a flight-control test, the simulation might calculate vehicle position, velocity, attitude, and environmental conditions. It then provides representative sensor information to the flight computer.

The flight computer processes those inputs and generates control commands. The simulation receives the commands, applies them to the aircraft or missile model, and calculates the resulting motion for the next simulation frame.

The physical controller experiences an operating loop similar to the one it would encounter in the actual system, but the scenario remains under laboratory control.

A credible test environment must coordinate several architectural layers.

Models represent the behavior of the system and its operating environment.

Depending on the application, these can include:

  • Vehicle dynamics
  • Aerodynamics
  • Propulsion systems
  • Actuators and control surfaces
  • Sensors and navigation systems
  • Electrical and power systems
  • Atmospheric or space environments
  • Targets and threats
  • Radar or seeker behavior
  • Operator inputs
  • Component faults

Large test environments may combine models from several engineering teams and development tools. These models may use different sample rates, numerical solvers, interfaces, and data formats.

The real-time platform must integrate them without changing their intended timing relationships.

The operating system controls processor scheduling, interrupts, memory activity, device drivers, and competing workloads.

In a conventional environment, background activity can delay a simulation process unpredictably. A deterministic operating environment provides mechanisms for controlling this interference.

Relevant capabilities include:

  • Real-time task scheduling
  • Processor-core assignment
  • CPU shielding or isolation
  • Interrupt routing
  • Memory locking
  • Priority control
  • Timing measurement
  • Overrun detection

A real-time operating system provides these mechanisms, but the complete system must still be sized, configured, and tested appropriately. Installing a real-time operating system does not automatically make every application deterministic.

The scheduler determines when models and supporting processes execute.

A simulation may contain:

  • Fast control models
  • Slower mechanical or thermal models
  • Input processes
  • Output processes
  • Test scripts
  • Data-recording processes
  • Network interfaces
  • Visualization applications

These components may not all operate at the same rate.

The scheduler must coordinate their execution periods, dependencies, processor assignments, and data exchanges. It must also identify when a process does not complete within its assigned period.

See How Multirate Real-Time Simulation Works for a deeper explanation of rate groups and execution order.

The I/O system connects mathematical models to physical equipment.

An aerospace or defense test environment may require:

  • Analog inputs and outputs
  • Discrete and digital I/O
  • Serial communication
  • Avionics data buses
  • Ethernet-based interfaces
  • Timing and synchronization signals
  • Resolver or synchro simulation
  • LVDT and RVDT emulation
  • FPGA-based signal generation
  • Custom or legacy interfaces

Some I/O must be synchronized directly with the simulation frame. Other devices transmit data independently and are better handled asynchronously.

Treating every interface identically can either burden the critical simulation loop or introduce uncontrolled timing variation. The architecture must define which exchanges are synchronous, asynchronous, periodic, or event-driven.

See Synchronous vs. Asynchronous I/O in Real-Time Simulation for more detail.

The equipment under test can be an individual component, a collection of subsystems, or a nearly complete system.

Examples include:

  • Embedded flight computers
  • Guidance processors
  • Avionics units
  • Autopilot controllers
  • Navigation systems
  • Sensor-processing hardware
  • Actuator controllers
  • Power-management systems
  • Mission computers
  • Operator controls and displays

The maturity and scope of the equipment under test generally increase as the program moves through its validation workflow.

Test Control, Data Recording, and Analysis

Engineers need to configure scenarios, change parameters, introduce faults, monitor signals, record data, and reproduce failures.

These activities must not interfere with time-critical model execution.

A real-time test platform should provide controlled methods for:

  • Initializing test conditions
  • Loading models and configurations
  • Starting and stopping test sessions
  • Changing parameters
  • Applying commands
  • Introducing faults
  • Monitoring live variables
  • Recording time-stamped data
  • Replaying captured data
  • Detecting timing overruns
  • Comparing test results

Test automation is particularly valuable when teams need to execute large regression suites or reproduce the same scenarios across multiple hardware and software revisions.

Aerospace and defense validation often progresses through several X-in-the-Loop stages.

Validation stageWhat is introducedTypical objective
Model-in-the-LoopMathematical models and control logicEvaluate algorithms and system behavior
Software-in-the-LoopProduction or representative softwareVerify software against simulated inputs
Processor-in-the-LoopTarget or representative processorEvaluate software in a processor-specific environment
Hardware-in-the-LoopPhysical controller or subsystemTest hardware and software through representative interfaces
System integrationMultiple connected subsystemsEvaluate interfaces and combined behavior
Human-in-the-LoopOperators, controls, and displaysEvaluate interaction, training, and operational workflows

These stages are not always strictly sequential. Programs may move between them as designs change, new hardware becomes available, or test results expose additional questions.

A consistent simulation architecture makes it easier to reuse models, test definitions, interface configurations, and recorded data throughout the process.

Hardware-in-the-Loop, or HiL, testing connects physical equipment to a real-time simulation of the system surrounding it.

The hardware receives representative signals and produces actual outputs. The simulation interprets those outputs, updates its models, and returns the next set of inputs.

HiL testing allows engineers to evaluate hardware and embedded software under scenarios that may be:

  • Expensive to reproduce physically
  • Dangerous to perform during early development
  • Difficult to create consistently in the field
  • Dependent on unavailable subsystems
  • Too brief or variable for effective troubleshooting
  • Impractical to repeat across many test cases

HiL does not eliminate the need for physical testing. It provides a controlled environment for finding problems, refining test cases, and increasing system maturity before later-stage events.

Flight-control systems depend on coordinated interaction among software, processors, aircraft dynamics, navigation inputs, sensors, actuators, and communication interfaces.

A real-time simulation can provide the flight computer with representative operating inputs while receiving its actual control outputs. Engineers can evaluate nominal operation as well as sensor faults, actuator failures, environmental changes, and unusual flight conditions.

Applications include:

  • Flight-control computer testing
  • Autopilot validation
  • Stability and control evaluation
  • Navigation-system integration
  • Avionics bus testing
  • Propulsion-control validation
  • Regression testing
  • Failure and recovery scenarios

Missile-system validation can involve flight dynamics, guidance algorithms, navigation hardware, sensor fusion, actuators, seekers, propulsion, power systems, and embedded processors.

Early tests may focus on an individual sensor or algorithm. Later configurations may introduce physical guidance hardware and closed-loop flight models. Full-system environments can combine avionics, control, power, propulsion, communication, and fault-insertion capabilities.

Concurrent Real-Time’s Missile TestBench addresses this progression through scalable configurations for:

  • Subsystem validation and sensor simulation
  • GN&C prototyping
  • Full-system flight and control validation

This provides a path from early interface testing to larger integrated HiL environments without treating every development stage as an unrelated test architecture.

Spacecraft and launch systems must be validated for conditions that cannot be reproduced completely before deployment.

Real-time simulation can support:

  • Launch-vehicle dynamics
  • Flight-software testing
  • Attitude determination and control
  • Guidance and navigation
  • Propulsion and stage-control simulation
  • Sensor and actuator emulation
  • Spacecraft hardware integration
  • Ground-system testing
  • Operator training and mission rehearsal

Models and physical hardware can be introduced gradually as the system progresses from software development to integrated testing.

Sensor-processing systems must respond to time-sensitive signals representing targets, movement, environmental conditions, interference, and faults.

Real-time computing, FPGA processing, and specialized I/O can be combined to generate inputs, capture responses, and maintain synchronization with system models.

Relevant applications include:

  • Radar-system evaluation
  • Seeker testing
  • Inertial sensor emulation
  • Position and navigation inputs
  • Target and threat simulation
  • Signal conditioning
  • High-speed data acquisition
  • Custom interface development

Training environments introduce an additional timing dependency: human perception and response.

Delayed controls, inconsistent display updates, or poor synchronization between physical motion and visual output can reduce realism and training value.

Real-time simulation platforms can coordinate:

  • Vehicle or mission models
  • Operator controls
  • Instrumentation
  • Displays and visual systems
  • Instructor commands
  • Scenario events
  • Data recording
  • Performance review

The same underlying technologies can support engineering simulators, training systems, or environments combining both objectives.

Simulation fidelity is often discussed primarily in terms of model detail. A more detailed aerodynamic, propulsion, sensor, or environmental model may reproduce more physical behavior.

However, fidelity also has a timing dimension.

A mathematically accurate model can still produce misleading test behavior if:

  • Inputs are processed late.
  • Outputs reach the hardware at inconsistent intervals.
  • Subsystems lose their intended phase relationship.
  • Communication delays are not represented correctly.
  • Faults are inserted at the wrong time.
  • An overrun occurs without being detected.
  • Logging or visualization disrupts the critical loop.

Model fidelity and timing fidelity must therefore be considered together.

Adding model complexity can also increase execution time. A higher-fidelity model is only useful in a real-time environment if the complete workload continues to meet its timing requirements.

Modern aerospace simulations may contain models with different rates, computational loads, and data dependencies.

Additional processor cores can provide more capacity, but models cannot always be distributed arbitrarily. Engineers must consider:

  • Which models can execute independently
  • Which values must be exchanged during the same frame
  • Which tasks require synchronization
  • Which processes should share a core
  • Which processes should be isolated
  • Where interrupt and I/O processing occurs
  • How much timing headroom remains
  • What happens during the busiest combination of scheduled tasks

Poor workload distribution can add synchronization overhead or move the bottleneck elsewhere.

Scaling a simulation therefore requires both computing capacity and control over execution architecture.

Average execution time can hide occasional deadline overruns. Testing should examine maximum observed execution time, jitter, headroom, and behavior under demanding conditions.

Models, synchronous I/O, network traffic, logging, visualization, and test scripts do not necessarily belong in the same time-critical process.

Separating critical and noncritical work helps protect the simulation schedule.

Embedding physical I/O definitions directly into model logic can make models difficult to reuse across test stands or program stages.

Separating model variables from physical channel mappings provides greater flexibility as hardware configurations change.

A multirate simulation may appear lightly loaded during most cycles. The most demanding cycle occurs when several rate groups execute together.

Performance testing must include these peak combinations.

A model may meet its deadline when run alone but behave differently when logging, visualization, I/O, network traffic, and other applications are active. The complete test configuration should be evaluated under representative workloads.

Timing errors, stale data, delayed outputs, or interface problems can appear to originate in the equipment under test.

Adequate tracing and system visibility are necessary to separate test-system problems from actual product behavior.

Engineering teams should evaluate the complete architecture rather than comparing processor specifications alone.

Important questions include:

  • How are model and I/O processes scheduled?
  • Can critical tasks be assigned to specific processor cores?
  • Can unrelated operating-system activity be isolated?
  • How are overruns detected and reported?
  • Can maximum execution time and jitter be measured?
  • Which modeling environments and programming languages are supported?
  • Can models with different rates execute together?
  • How are data dependencies and execution order controlled?
  • Can models be prepared away from the target system?
  • Can existing model investments be reused?
  • Which analog, digital, serial, avionics, and network interfaces are available?
  • Can custom FPGA functionality be developed?
  • How are synchronous and asynchronous interfaces separated?
  • Can legacy test equipment be retained?
  • Can configurations expand as the program matures?
  • Can test sequences be scripted?
  • Can faults be introduced at controlled times?
  • Is data time-stamped and recorded without blocking the critical loop?
  • Can test data be replayed?
  • Can configurations and scripts be version controlled?
  • Can regression tests be repeated consistently?
  • Can workloads be distributed across processor cores or systems?
  • Can the platform support additional models and I/O?
  • Is the architecture tied to proprietary hardware?
  • Can individual components be refreshed over time?
  • Are integration, tuning, training, and long-term support available?

A more detailed checklist is available in How to Evaluate a Real-Time Simulation Platform for HiL and XiL Testing.

Concurrent Real-Time provides an integrated technology stack for aerospace and defense simulation, testing, data acquisition, and training.

RedHawk Linux provides the deterministic operating environment. It includes capabilities for real-time scheduling, processor isolation, interrupt control, memory management, and analysis of time-critical workloads.

SIMulation Workbench provides the framework for integrating and executing models, coordinating I/O, configuring test sessions, managing real-time data, and recording results.

Its memory-resident real-time database separates model variables from physical I/O mappings, allowing models and hardware configurations to evolve more independently.

iHawk provides scalable real-time computing using commercial processor architectures, configurable memory, storage, GPUs, expansion options, and I/O.

SignalHawk products connect models to physical signals and equipment. FPGA Workbench supports application-specific signal processing, timing logic, protocols, and interface behavior.

NightStar provides debugging, tracing, monitoring, scheduling, and tuning capabilities for time-critical Linux applications.

AeroHawk brings Concurrent technologies together in configurable platforms for aerospace and defense simulation.

Missile TestBench applies the same technology foundation to scalable missile-system validation environments, ranging from subsystem and sensor testing to GN&C prototyping and full-system validation.

Real-time simulation gives aerospace and defense teams a controlled way to evaluate software, hardware, interfaces, models, and operators before relying on later-stage field or live-test events.

The defining requirement is not simply computational speed. A credible real-time environment must preserve the timing relationships among model execution, physical I/O, connected hardware, data recording, and operator interaction.

That requires coordinated decisions about:

  • Model architecture
  • Scheduling
  • Processor allocation
  • Operating-system behavior
  • I/O synchronization
  • Data management
  • Test automation
  • System visibility
  • Future scalability

When these elements operate as one controlled system, real-time simulation can provide repeatable evidence about how complex aerospace and defense systems behave under both expected and off-nominal conditions.

To explore platforms and integration services for these applications, visit Aerospace and Defense Real-Time Solutions.

What is real-time simulation in aerospace and defense?

Real-time simulation executes models in synchronization with actual elapsed time. Calculations, inputs, and outputs must be completed within defined timing limits so that physical hardware or human operators can interact with the simulation.

How does real-time simulation differ from offline simulation?

Offline simulation can run faster or slower than physical time and can pause while completing calculations. Real-time simulation must maintain its timing relationship with the physical world throughout the test.

Why is deterministic timing important?

Deterministic timing ensures that critical operations complete within known timing boundaries. Without it, delayed inputs, outputs, or model calculations can change closed-loop behavior and reduce test repeatability.

What is Hardware-in-the-Loop simulation?

Hardware-in-the-Loop simulation connects physical equipment to a real-time model of the surrounding system. The simulation generates inputs for the hardware, receives its outputs, and uses those responses to calculate the next system state.

Does a real-time operating system guarantee deterministic simulation?

No. A real-time operating system provides mechanisms for controlling scheduling, interrupts, processors, and memory. Models, I/O, logging, networking, and the complete workload must still be configured and tested appropriately.

Is a more detailed model always better?

Not necessarily. Greater model detail may improve physical fidelity, but it also increases computational demand. The model must provide the fidelity required by the test while still completing within its real-time execution period.

Can existing models be used in a real-time environment?

Often, yes. Suitability depends on the model’s solver, sample times, computational requirements, supported code-generation path, external dependencies, and interface assumptions.

Can real-time simulation replace flight or field testing?

Real-time simulation complements physical testing rather than replacing it entirely. It allows teams to evaluate more scenarios, identify problems earlier, refine test cases, and improve system maturity before later-stage testing.

Related Articles

  • White Paper: From Subsystem to Preflight A Progressive Hardware-in-the-Loop Validation Framework for Missile Development

    White Paper: From Subsystem to Preflight A Progressive Hardware-in-the-Loop Validation Framework for Missile Development Discover a practical, three-stage approach to identifying subsystem, closed-loop, and mission-level integration risks before committing to flight testing.…

    Read more

  • U.S. Treasury Assistant Secretary Chris Pilkerton Visits CCRT

    Assistant Secretary Chris Pilkerton Visits Concurrent Real-Time Concurrent Real-Time was honored to welcome Chris Pilkerton, Assistant Secretary of the Treasury for Investment Security and Chair of the Committee on Foreign Investment in…

    Read more

  • Synchronous vs. Asynchronous I/O in Real-Time Simulation

    Synchronous vs. Asynchronous I/O in Real-Time Simulation A real-time simulation must exchange data with physical devices while continuing to execute its models on schedule. Some of those data exchanges need to occur…

    Read more