Skip to content
Login / Sign Up

Resistor Simulator Card

Contact an expert

What is the Resistor Simulator Card?

Concurrent Real-Time’s Resistor Simulator PCIe card provides 16 individual resistors programmable from 45 ohms to 1 megaohms in 5 ohm steps. Voltage ranges are +/-14V with a maximum current of +/-10mA. Includes OPEN, +VOLTAGE and GROUND fault insertion on all resistor lines.

See the data sheet

Resistor Simulator PCIe Card



Card16-channel digital programmable resistance
Resistance45 to 1M ohm range in 5 ohm increments
Low Scale Selection10 ohm
Voltage+/-14V @ 10 Milliamp
Fault InsertionOpen, ground, and V+
Galvanic IsolationYes
Overvoltage ProtectionYes
Analog Devices AD5293 Digital PotentiometersYes
PCIePCIe x1 Revision 1.0a
NIST Traceable Calibration StandardOptional
Accuracy10 ohms: +/-4 ohms; 45 ohms to 1K ohms: +/-10%; Greater than 1K ohms: +/-5%


DimensionsFHFL PCI Express (12.3" long x 3.8" high)

Power Requirements

Power RequirementsLess than 25 Watts
Details3.3VDC @ 2Amp, 12VDC @ 1.2Amp


Operating Temperature10° to 40° C
Storage Temperature-40° to 65° C
Relative Humidity10 to 80% non-condensing
OtherROHS Compliant

Ordering Information

16-Resistor Simulator PCIe CardCP-RESSIM-16
RedHawk Linux DriverWC-RESSIM
SIMulation Workbench LicenseICS-SWB-1284
6-foot 68-pin Host Interface CableCX-CBL-HSI-68-06
10-foot 68-pin Host Interface CableCX-CBL-HSI-68-10
Breakout ModuleCX-CBL-AIO-BRKF

More Real-Time I/O Cards

Back to top