Skip to content

Universal Exhaust Gas Oxygen Sensor Card

Contact an expert

What is the Universal Exhaust Gas Oxygen Sensor Card?

Concurrent Real Time’s UEGO is a 4-channel Universal Exhaust Gas Oxygen Sensor simulator card with a PCI Express interface that is ideal for high-performance hardware-in-the-loop (HIL) simulation and test applications. It will allow a software simulation to control the operating feedback parameters as if an O2 sensor was connected to an engine control ECU. It can simulate both wide band and narrow band O2 sensors. There is galvanic isolation for each channel pair. In addition, each channel can monitor the O2 heater drive pulse code modulated (PCM) signal for proper feedback of the sensor temperature. O2 sensor signals have open, ground and positive voltage fault insertion capability.

See the data sheet

Universal Exhaust Gas Oxygen Sensor Card

Specifications

Features

O2 Sensor Simulation4-channel
SensorsWideband or narrowband
Heater PCM MonitoringYes
Fault InsertionOpen, ground, and V+
Galvanic Isolation Per Channel PairYes
Input Protection+/-50 VDC
On-Board Test ASICYes
ConnectorsIndustry standard SCSI 68-pin connector for outputs
PCIePCIe x1 Revision 1.0a

Packaging

DimensionsFull Height PCI Express (9.5"" long x 3.8"" high)

Power Requirements

Power RequirementsLess than 25 Watts
Details3.3VDC @ 1.5Amp, 12VDC @ 1Amp

Environmental

Operating Temperature10° to 40° C
Storage Temperature-40° to 65° C
Relative Humidity10 to 80% non-condensing
OtherROHS Compliant

Ordering Information

Universal Exhaust Sensor Simulation CardCP-UEGO-4
RedHawk Linux DriverWC-UEGO
SIMulation Workbench LicenseICS-SWB-1283
6-foot 68-pin Host Interface CableCX-CBL-HSI-68-06
10-foot 68-pin Host Interface CableCX-CBL-HSI-68-10
Breakout ModuleCX-CBL-AIO-BRKF

More Real-Time I/O Cards

Back to top