Skip to content

Fault Insertion Signal Conditioning Catalog

SIGnal Workbench

Catalog

20-SLOT SIGNAL WORKBENCH FIS CHASSIS DESK/RACK MOUNT (HS000-SIGWB-20-FISC​)

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

             

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

               

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

                   

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

                   

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

                   

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

                   

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

The signal conditioner can be used as a 32-channel input, 32-channel output, or any combination of inputs and outputs up to 32. The default configuration for the transformer signal conditioner is 16 input channels and 16 output channels. This configuration will support 16 2-wire LVDT channels.

Features:

±20V differential input (low side inputs can be tied together for single ended operation)
±20V differential output
10k Ohm impedance on the primary and secondary

                   

Back to top